Recent content by Biginner

My case 1835c diesel has lost movement to the bucket. When i start it after a day of not running, there is no response to wheels, bucket or arms. After a couple minutes i slowly start getting a response from the wheels. Little by little the wheels slowly start moving intill i have full response...

Ok. I've been very busy for a couple weeks. Back to the skidsteer. It drives back and forth and turns with no problem. Bucket and arms not responding. Can it be my seat bar switches? Or possibly the aux. hydrolic pedal?

So... small update. The coupler is fine. Yesterday when i drove the skidsteer to my driveway 300 feet away, the whole way the machine jerked on and off and i slowly got the the driveway. Today the diveing lever respond perfectly. The bucket and arms are still limp. At this point I'm 99% sure its...

Will check that out today.

No warning lights. I let it run for about 10 min and kept pushing the joysticks forward and managed to studder/drive it to my driveway about 300 feet away. It seemed that the warmer the machine/oil got the better response i get from the drive. The bucket stays limp... no response.

Oil level isn't low. I will be changeing the filters. I know where the big main filter is located.is there more filters than that one?

The noise is actually more of a whining than squeeling

I have an older Case 1835C uniloader. It was working great for about 4 months. Then one day while moving some dirt the joysticks started feeling weak untill everything stopped responding. The fluid level is good. No leaks. The pump seams to work because when i start it up it will move forward...