None of the places mentioned had any access to the belt...why they list it I don't know...after a ridiculous run around with Trupar they finally took it off their site. I didn't try the Bobcat belt I mentioned. I will eventually. If you do please let me know how it works out. Bill
No, I found a Bobcat belt kinda close but only 3/8" thick not the 7/8" thick I need. My belt is 65". Long x 1.75" Wide x 7/8" Thick. The Bobcat belt #7177671 is 65 x 1.6 x 3/8.
Yes the hose to the gauge is on the incoming side so I'm assuming the gauge would have regular pressure and then go up if the filter started clogging. Just hoping to get something in the right range. Thank you, Bill
I have a 1965 Mustang 1000 skidsteerand can't seem to find a drivebelt for the variable speed drive pulleys. The original part number is 020-16902 and the dimensions are 65" Long, 1.75" Wide, and about 7/8" thick. I found a Bobcat belt 7177671 that is 65" Long x 1.6" Wide and around 3/8" thick...
Hello, came upon your post...wondering if you've bought a new belt recently and where you might have found one.
Hello, I came upon your post and wonder if you've bought a drive belt recently and where you've found one? My belt number is 020-16902. Thank you, Bill
I have this old Skid steer. I'm wondering if anyone knows what hydraulic pressure they operate at. The gauge has been gone that runs off the hydraulic filter mount and I guess shows when the filter needs replacing. I think the filter is 10 micron and works at 15 gals per minute. Just would like...