Recent content by BattleCat

Well… After more time than I wanted to put into online research and the phone to find an aftermarket supplier of the control valve (never found one) and why this block didn’t have bushings. I was able to find a gentleman from parts support and he said he was 99.9% certain that all 743’s had the...

Thanks Markle! I skimmed it on my phone and it looks like this is what I need. Will dig it to it when I get in front of my computer

See post #6

Roger that. Do you have any insight as to why the parts book calls out bushings (#8 In diagram above) and there is nowhere for these bushings to go in my valve block?

Thanks for the replys. I did look at the other SN breaks prior to posting here and they all show bushings. Markle is showing the tilt control section. I am working on the Lift spool #7 in this diagram and my control valve body matches that shown in the same diagram Everything else was there...

Additional pics

Here is the short version of my story... Have lift spool leak - did my research prior to starting the job - when I pulled the spool out of the block there were no bushings as the parts diagram calls out (I used my serial number on Bobcat parts book webpage) - I attempted with my finger and some...