Recent content by Arley

Help Support SkidSteer Forum:

  1. A

    1996 Bobcat 753 Turning Issue - Serious Problem

    Resolution: Thanks for your help.... I rebuilt both drive motors and everything works as it should. I still have a few minor repairs to complete but at least the drive issue is behind me.
  2. A

    1996 Bobcat 753 Turning Issue - Serious Problem

    Well....at this point I've got both the motors apart on the bench so I'll have to get a couple of kits and put them back together before I can continue testing. I cleaned the inline filters (with brake cleaner and air pressure) and found a fair amount of brass particles (no doubt from the drive...
  3. A

    1996 Bobcat 753 Turning Issue - Serious Problem

    Well... both the L & R Drive Motors are now on the bench. They are clean and ready for new seals & rings. I noticed that the Left Motor (was working properly) had the same amount of redish brown crud under the brass ring as the left motor. Both motors appear to be undamaged with no scoring and...
  4. A

    1996 Bobcat 753 Turning Issue - Serious Problem

    I decided to pull the Right Drive Motor apart and it looks great. I'll put a kit in it but there is no mechanical damage and no marks or scoring on any of the parts. There was however a small amount of brown crud under one of the rings so I don't feel bad about tearing it down. I'll go ahead and...
  5. A

    1996 Bobcat 753 Aux. Hyd. Missing?

    I purchased a fixer up 753 with Aux. Hyd. but I suspect the Aux pump has been removed. Where would the Aux Pump be located?
  6. A

    1996 Bobcat 753 Turning Issue - Serious Problem

    I just bought a fixerup Bobcat 753 and I'm perplexed. It will sort of drive staight but actually only turns right with full power. When I steer left it feels like it is fighting me. The engine loads down and it goes no place. It only seems to opperate properly when in a full right turn as the...
Top