s130 bobtach

[robmon]

In Aus and have a s130 with a flogged out bob tach, anyone have a second hand one or know where best place to get new one and what sort of $$ would I be looking at , thanks in advance

 

[antfarmer2]

Ebay has a few differant ones that weld on

 

[Tazza]

Ebay has a few differant ones that weld on

Just what is flogged out? and what sort of gear do you have to repair it?
I have rebuilt a few that were in poor shape, especially the lower pivot points. I machined new bosses and bushings, worked very well.
I'm from .au too, Brisbane

 

[robmon]

Just what is flogged out? and what sort of gear do you have to repair it?
I have rebuilt a few that were in poor shape, especially the lower pivot points. I machined new bosses and bushings, worked very well.
I'm from .au too, Brisbane

Thanks guys , lower pivot points, getting new boss welded in, glad it could be repaired , they were talking 2400 for new bobtach

 

[Tazza]

Thanks guys , lower pivot points, getting new boss welded in, glad it could be repaired , they were talking 2400 for new bobtach

Glad you found someone to weld new ones in. It took me a while to do, but i don't have the gear a big shop has. Gouged the old bosses out with the plasma cutter and a grinder.

 

[cambo77]

Glad you found someone to weld new ones in. It took me a while to do, but i don't have the gear a big shop has. Gouged the old bosses out with the plasma cutter and a grinder.

Tazza, I have a mate in Bundaberg who is after one for hi 753 IF YOUR INERESTED?

 

[Tazza]

Tazza, I have a mate in Bundaberg who is after one for hi 753 IF YOUR INERESTED?

Sadly i don't have any spares, i only have repaired ones that came off and went back on machines i bought.