Bobcat T250 Foot Control

Skidsteer Forum - Bobcat, New Holland, Case, John Deere

Help Support Skidsteer:

luke1656

New member
Joined
Mar 4, 2012
Messages
2
got a bobcat t250 and it seems like the foot controls do not work but if you switch over to hand control it works fines, what could be the problem?
 
could be number of differnt things , firs is unit giving any codes. this should point in direction second is lif and tilt, or just one. the reason i ask is this stys is fly by wire, would be rare for both foot sensors to fail. is there dirt built up around pedals? are they unlocking. will be to glad to assist further. also i belive that defualt is hand, (this is if acs detects a problem. hrs and S/n would be helpfull?
 
could be number of differnt things , firs is unit giving any codes. this should point in direction second is lif and tilt, or just one. the reason i ask is this stys is fly by wire, would be rare for both foot sensors to fail. is there dirt built up around pedals? are they unlocking. will be to glad to assist further. also i belive that defualt is hand, (this is if acs detects a problem. hrs and S/n would be helpfull?
it seems like it blows out that fuse, and once i put a new one in, it works and then it blows out after a while again
 
it seems like it blows out that fuse, and once i put a new one in, it works and then it blows out after a while again
which fuse the acs? gotta help me here? operator input is the most important tool in box, see smell taste, if it comes in working i down load codes might give me sniff but not enough. what are you doing . is it hot or coldpick and carry or grubbing this is more more important than you can imangine. if i cannt break it i cant fix it.
 
Check out the foot controls. There R "cleanouts" on the front of the machine. The're probabley PACKED. Going from hand, or foot should'nt change lift/tilt times.
 
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
Check out the foot controls. There R "cleanouts" on the front of the machine. The're probabley PACKED. Going from hand, or foot should'nt change lift/tilt times.
Buy the way. Thank your sales guy for pointing out that point!
 

Latest posts

Back
Top