Hey Guys! I'm hoping ya'll can help me out, I have a 642b that doesn't have the aux lines run on the boom, I have lines but before I go thru the trouble of running them I wanna make sure everything else is there. I read about having to remove a bolt to engage the aux but I can't find it. I have the rops up right now and can take pics if anyone would be willing to pin point exactly which bolt I have to remove. Also there is a center pedal on this machine, it was kind of stuck in the down position, with the rops up I was able to move the linkage but it doesn't "spring return"...what is this pedal for? PLEASE help the new guy...I would really like to put a plow on this machine and be able to angle the blade. Thanks in advance!
642b newbie engage aux & center pedal?
- Thread starter bQQt
- Start date
Here are the pictures of the linkage... http://i80.photobucket.com/albums/j200/picserver/642b/DSC01384.jpg http://i80.photobucket.com/albums/j200/picserver/642b/DSC01385.jpg http://i80.photobucket.com/albums/j200/picserver/642b/DSC01386.jpg http://i80.photobucket.com/albums/j200/picserver/642b/DSC01387.jpg
I just wanted to add a few pictures so hopefully someone will be able to show me what bolt to remove.
The pedal is your park brake, when forward the machine should not move. Its opbviously worn and needs adjusting.
The bolt you need to remove on the last picture is the one on the left while looking at the machine from the front. It seems you need the linkage from the lever to the valve block though. I can't see it in the picture, its used to link the lever to the bottom spool on the valve block. I assume there is a spool at the bottom free? as i can't see it in the pictures either.
Latest posts
-
T 243 HD upper pins and bushings at top rear of machine
- Latest: PALLETTOBYPALLET
-
-
-
-
-
-
-
-
-
-