A300 manual?

[Websterspower]

Does anyone have access to a digital copy of an A300 manual? I looked through oldmachinist's awesome collection but did not see one... Any help would be greatly appreciated . Thanks in advance Shawn

 

[Tazza]

Your local dealer will have electronic copies, they aren't that expensive. For an *A* series machine, sadly, i think you'll be needing one, plus the help of your dealer.

 

[Websterspower]

Your local dealer will have electronic copies, they aren't that expensive. For an *A* series machine, sadly, i think you'll be needing one, plus the help of your dealer.

Dealer help too.....? Plug and play right? Thanks Tazza

 

[Tazza]

Dealer help too.....? Plug and play right? Thanks Tazza

Sadly the A series machines have had a lot of problems. Some owners have had no problems, but some have had nothing but issues. I remember a member that bought one new, it spent more time in the shop than it did out making him money.
I hope yours isn't one of those.
Being a new machine, you will be able to work on the mechanical side, but there is a fair bit the dealer will need to plug in their laptop to your machine to program/calibrate.

 

[Websterspower]

Sadly the A series machines have had a lot of problems. Some owners have had no problems, but some have had nothing but issues. I remember a member that bought one new, it spent more time in the shop than it did out making him money.
I hope yours isn't one of those.
Being a new machine, you will be able to work on the mechanical side, but there is a fair bit the dealer will need to plug in their laptop to your machine to program/calibrate.

Thanks again Tazza..... When I showed up on site the right rear tire was locked in a full crab position while all the other tires were straight. The operator said that he had switched from all steer to skid and the tire locked up. Operators manual explains that if signal from the positioning sensor on a wheel is interrupted in any way that tire will lock and need to be re-tracked... A simple process that was outlined in the operators manual, and the customer was back to work in no time.