Where do I get this hyrdaulic hose? (pictures in post)

[kao]

I have a 2003 S175 that I use around the house. I recently bought a tiller attachment (the first attachment I own using hydraulic hoses), and while I do try to be careful of such things, I accidentally pinched one of the cables.
I have my doubts, but I have to ask - can the cable be repaired?
Are the end couplers re-usable?
Can hoses like this be purchased pre-made or do I need to have something custom made?
I don't see how to add pictures so you will have to click the links below:
Coupling
Hose - the plain black hose with no "sleeve" on it.
Thanks in advance!

 

[OldMachinist]

You'll likely have to have one made up but its pretty simple. Take the quick coupler off, remove the hose and take it to a auto parts store(CarQuest, Napa, not AutoZone) or a farm or heavy equipment dealer and they can make one up in a few mins.

 

[Tazza]

You'll likely have to have one made up but its pretty simple. Take the quick coupler off, remove the hose and take it to a auto parts store(CarQuest, Napa, not AutoZone) or a farm or heavy equipment dealer and they can make one up in a few mins.

As OM said, any hydraulic hose shop can make one of those up for you easily and quickly. I don't know how much it will cost though, they aren't super cheap.

 

[kao]

As OM said, any hydraulic hose shop can make one of those up for you easily and quickly. I don't know how much it will cost though, they aren't super cheap.

Thanks guys. I'll try NAPA tomorrow.

 

[skidsteer.ca]

Thanks guys. I'll try NAPA tomorrow.

If Napa or someone local does not have the 1/2” male Faster coupler you can try www.discounthydraulichose.com or www.baileynet.com
baileys part # is 237-323
Ken

 

[Fishfiles]

If Napa or someone local does not have the 1/2” male Faster coupler you can try www.discounthydraulichose.com or www.baileynet.com
baileys part # is 237-323
Ken

Lokks like 1/2 inch (#8) 2 wire hose , # 8 JIC 90 degree Female Swivel by 1/2” Taper pipe thread