Different wheel offsets?

[otisdog]

Im looking at get a spare tire for my recently aquired 160S (763). I've looked at 2 different wheels that I've found on craigslist, and both had different offsets than what is on my unit, even though they were both 16.5 x 10. How many different offsets are there out there, and are the wheels stamped with any sort of I.D. to tell them apart? Thanks

 

[skidsteer.ca]

To my knowledge there is no part number to go buy. Just a measurement. Also some 763 machines had inset wheels to keep them down to 60” wide, but most had wheel that are pretty close to center (like posistive 3/4” or so) , My Nh LS 160 also uses the same rims as my 773. So if your machine is 66” wide ate the tires, any wheels form a LS 160 or 170 ot 753, 763, 773 machines should be right, but you would still need to measure them.
Ken

 

[otisdog]

To my knowledge there is no part number to go buy. Just a measurement. Also some 763 machines had inset wheels to keep them down to 60” wide, but most had wheel that are pretty close to center (like posistive 3/4” or so) , My Nh LS 160 also uses the same rims as my 773. So if your machine is 66” wide ate the tires, any wheels form a LS 160 or 170 ot 753, 763, 773 machines should be right, but you would still need to measure them.
Ken

My bill of sale says "inset flotation tires" so I must have the narrower track wheels. I'm @ home, it's @ work, so I'll check tomorrow. Explains why every wheel I looked at was different then what I have in my machine.