Seatbar icon displayed, Bobcat864 won’t start

[jdrouillard]

My Bobcat abruptly stopped while using last week. It cranks, but won't start. The seatbar icon is displayed on the screen regardless of position. I replaced the sensor, but no change. Any ideas?

 

[fortworth-cowboy]

My Bobcat abruptly stopped while using last week. It cranks, but won't start. The seatbar icon is displayed on the screen regardless of position. I replaced the sensor, but no change. Any ideas?

What machine, Serial #? Could you take a picture of the icon?

 

[jdrouillard]

Bobcat 864; Serial Number 518913530. I checked the screen, and no error codes are displayed.

 

[jdrouillard]

PErhaps this is a seatbelt icon and not a seatbar icon, not sure. I have had the unit for about 8 years and the seatbelt was disabled/removed by a previous owner. It has always run okay without it, so not sure this has anything to do with the failure to start. Fuel seems okay, I opens the filter and pumped the primer bulb. The bulb is full and diesel flows well with no apparent blockage.

 

[fortworth-cowboy]

PErhaps this is a seatbelt icon and not a seatbar icon, not sure. I have had the unit for about 8 years and the seatbelt was disabled/removed by a previous owner. It has always run okay without it, so not sure this has anything to do with the failure to start. Fuel seems okay, I opens the filter and pumped the primer bulb. The bulb is full and diesel flows well with no apparent blockage.

Ok, that is the Seatbelt sign. Can you try to start the engine and see what codes come ?
either the hammer and wrench sign on the RH panel or hold the light button on the LH side for 3 seconds.