Bobcat 743 replaced pump now no lift or curl

[ozark18]

Lets hope that fixes your issue. Ensure the pump outer part goes on the right way, you will notice there is an arrow, this shold face the rotation of the shaft as the engine spins it. So from memory, looking at the pump from the bucket, the arrow should point to the left. If it's backwards, you will not get flow.
Please check that i have the rotation correct, the engine should turn clockwise, so the shaft at the pump looking from the bucket should be ani-clockwise.
Good luck, the people at LPS are good to work with.

YAHOOOO The new pump from LPS works. Still running machine on jack stands to get all of the air out but I now have lift and tilt. Thanks everyone for all of the help and suggestions.

 

[Bswwood]

YAHOOOO The new pump from LPS works. Still running machine on jack stands to get all of the air out but I now have lift and tilt. Thanks everyone for all of the help and suggestions.

Awesome, glad you got it going.

 

[Tazza]

Awesome, glad you got it going.

Glad it's fixed, wonder what was wrong with the old one and why the rebuilder missed the initial issue.