730 bobcat air in system

Skidsteer Forum - Bobcat, New Holland, Case, John Deere

Help Support Skidsteer:

JoshStoff420

New member
Joined
Jul 9, 2019
Messages
1
I have a 730bobcat everything works except when I try to turn it won't and just wines I'm guessing it's air in the system how do I bleed it ? I never owned or operated a bobcat and am learning as I go anyhelp would greatly be appreciated .
 
Everything else works? You have forward and reverse, lift and tilt?Does it turn at all. Just driving it and working functions will bleed the system but I don't think air is the issue in this case. Did this problem just start all the sudden or has it progressively got worse? Did it run out of oil?
 
Everything else works? You have forward and reverse, lift and tilt?Does it turn at all. Just driving it and working functions will bleed the system but I don't think air is the issue in this case. Did this problem just start all the sudden or has it progressively got worse? Did it run out of oil?
Have you cleaned or replaced your suction line filter? On the hydraulic pump there might be a square block with 3 hoses on the left side, the filter is behind the middle fitting.
 

Latest posts

Back
Top