Bobcat A220 RH Joystick Base

[astoneburner]

New Member here thanks for accepting me I Picked up A220 That had been worked on by several people and I'm trying to get it back in shape. looks like it has had the Selectable Joystick Handles Kit Installed previously. Someone has disassembled rt joystick base and butchered wiring . The part number on base is 6689921 Parts page calls for 6697939 for base Haven't been able to locate used one with these numbers but have found similar looking ones. I believe the handle portion is still good anyone know if different bases will interchange? I'm missing mounting screws etc for this base does anyone rebuild these or offer rebuilt units? Thanks in advance

 

[Tazza]

It sounds like the previous owner had issues with a handle and tried to repair it. You may need to talk to the dealer and see what a new handle will run you.

 

[astoneburner]

Got a lot of wiring repaired now I have code 40-07 rt can joystick Y axis not in neutral. What is procedure to calibrate joystick without a laptop?

 

[Tazza]

Got a lot of wiring repaired now I have code 40-07 rt can joystick Y axis not in neutral. What is procedure to calibrate joystick without a laptop?

Sadly i don't have that information, you can try calling your local dealer and ask them what to do, generally the service guys are pretty helpful.

 

[astoneburner]

Sadly i don't have that information, you can try calling your local dealer and ask them what to do, generally the service guys are pretty helpful.

Ok got my new Right hand joystick base! Now my problem is the main harness wire connector was butchered/cut off. My wiring diagram is not correct it shows five wires mine has four Main harness has Purple. Purple/white. Orange. Black. New joystick harness has. Brown. White. Purple/white. Yellow/white. Anyone have a220 that can take a picture of main/rt joystick connector? Thanks