silverstrk65
Member
- Joined
- Sep 15, 2014
- Messages
- 5
Hello, I have a L553. Lately when i go to start it, it just clicks. When i use jumper cables to the starter it spins over. I did try using a voltmeter on the solenoid and it shows 12 volts when you turn the key on the side that goes to starter. Going by the typical bad solenoid from the clicking sound, can it be bad but still allow voltage to go through? Im new to skid steers and wanna make sure theres nothing else to check before i start changing parts. Thanks in advance guys.