wisconsinjimmy
Active member
- Joined
- Mar 26, 2014
- Messages
- 29
Need some help on this, I need to replace all axle bearings and seals and yes I removed the engine, took one side plate off as the manual tells me I have to remove the big chain and I should turn the chains with a socket wrench which I did on the disc caliper, marked where I started and went one full rev but no master link. Not to confuse the issue but I can see on the right front axle that it has been removed (silicone) and as I mentioned no master link. Do I need to remove this chain (6510171 LINK connector, #80 H.S. chain - Press Fit )