Jerry, I had already replaced all 4 of the rubber mounted bushing on the linkage and one of the side side bearings as you did. After several adjustments it now does not creep, yippy! My next problem is: I want to get a root grapple for it. I was looking at the hydraulics for the front aux hydraulics an saw that it has the couplers on the front and the hard lines on the lift arm,but there are no hoses connecting to the hard lines in the back of the machine. If you open the engine door and look to your left on the inside below the air filter there are 2 capped off lines that I think are there to connect to the hoses to the front aux hydraulics. BUT they have a bend toward the back of the machine, making it almost impossible the connect the hoses. (I need to lean how to put pictures on this site.) I took a picture to the Bobcat dealer and ended up with 3 parts guys and 1 mechanic, none of them could understand how this could be. The hard lines are factory clamped, not kinked, and look original, if they went straight up (as in the parts book) I could easily connect the hoses for the front aux hydraulics. Any thought from anyone?