Hello everyone. I have come to the conclusion that I need to replace the upper pins and bushings in the lift arms. They are worn bad, and allow the arms to shift from side to side, and spread at the pivot pins. It got so bad, it cracked the cross member in the front, that was previously welded when I bought the machine. I have done a search to see if there was any advice in this area, but I could not find anything. Basically I am looking for advice on how to proceed with this repair, and if i have the pins and bushings made, what kind of material should i use? anything would be helpful.I have an idea how to proceed, but figured why re-invent the wheel.
Fred
Fred