Recent content by redlee

No pins, crimped on. Thanks

I have an Edge toothed bucket with welded on teeth also crimped on. How in the heck do you replace these teeth ? I emailed Edge no response. The teeth sit in a pocket and are crimped in. I was considering cutting/grinding to remove them and get a bolt on set. Thanks

Thanks, I figured as much.

I know on my Mustang the countdown wont work if the battery is even slightly undercharged.

Ive seen a few videos of Skids operating either on their nose or butt, almost vertical. Have these been modified with extra oil pickups, are they actually designed to run as such ? I know most 4 Strokes are not and will fail, just curious. Not sure if this is the correct section, move please if...

Ok so Cummins want $110 for a Thermostat for my Mustang , can one not just match the dia. and temp and use any Thermostat ? I dont see why not !

My Skidsteer calls for Motor oil in the CC , would a non detergent oil not be better suited for this application! Detergent oils keep the crud in suspension and my thinking would be to let the crud settle out like a non detergent oil would do. Or am I missing something Thanks

I bought a 2006 2066 Mustang. Reasons for chosing were Normally aspirated Cummins Engine , Hydraulic Pumps and parts are not Proprietary, parts anywhere pumps anywhere. Nothing fancy built strong and simple. easy to work on. 300+ Hrs. and no problems

Thanks, checked air filter, its dirty.

Sorry thought this was for all Skidsteers,anyways any help would be appreciated. Thanks

I have a 2066 Cummins Mustang, since I bought it starts and runs fine . The other day when I started it , it idled fine but would run rough on throttle up it would miss and belch black smoke. I let it idle for awhile and then it was back to normal, any ideas. Thanks

I have a 2066 Cummins Mustang, since I bought it starts and runs fine . The other day when I started it , it idled fine but would run rough on throttle up it would miss and belch black smoke. I let it idle for awhile and then it was back to normal, any ideas. Thanks

How many owners buy OEM Filters, how many buy thier filters from other places,do you trust say NAPA filters on your equipment. Where does say Mustang get thier filters made.

I have an opportunity to purchase a used 2066 Cummins Powered Skid any concerns or opinions about Mustang in general or this specific machine Thanks

I am renting a 2007 2066 Cummins Mustang, so far I like it I have an option to buy it, any issues with this or mustang Skids Thanks