Recent content by hlw

My LX885 got a big leak in the case drain that goes from the front motor and tees in at the back motor. the parts list shows a standard or deluxe line. One is longer than the other. how do I know which one it is before I take it off. It sounds like this line lets in air if it leaks but mine is...

The drive motors have a plate held on to the bottoom with small machine screws where oil is leaking from in a small stream. New Holland parts dont seem to show a motor breakdown so I can't see what this plate holds in. These are visible thru the mounting bolt access hole in the belly pan. Only...

I had the cold reading on my LX885. The temp sensor is in the tank adjacent to the rh drive levers and the linkage pulled the wire off since it is built too tight. I got the wiring baack on but the lever now contacts bare wire and triggers the overheat warning when the drive lever is fully in...

Sorry to be gone so long. It's a 97 LX885. Used it some since it came home from the shop and the gearcase doesn't seem to be filling. Maybe the mechanic's imagination. Came home with a major leak that they missed.

One or both pumps seem to leak into the gearbox, overfilling it. Is the seal replaceable without tearing down the whole pump? It looks like I have to tilt cab and remove oil reservoir and fuel tank to get at the bottom bolts on the pumps or is the bottom bolt accessable from under the machine?

Just got the EIC replaced on mine so I have 0 hours again