Recent content by bfriendly

I have a lowe brand auger on my new holland l775 skid steer, and having trouble making any real progress drilling 18" x 4.5ft deep holes without a helper on standby to scrape clay out of the bit with a shovel.. even with a helper it is VERY slow.. in sandy soil or topsoil it is not a problem...

Thanks for the help! the linkage was/is totally seized up where it went through the carrier bushing which is hidden out of sight under the pedal. he whole assembly removed and soaking now.

I have a new holland L775 with aux hydraulic hookup at the front mounting plate that I have never used. This is the type with optional center pedal for the aux hydraulics and a valve mounted by the operators feet. There is a direct rod linkage that goes to the valve. I hooked up an auger for the...

Well I put "universal tractor fluid" in all three compartments. I plan to replace the gearcase and chaincase with 80-90 wt in a couple of weeks unless anyone reports back here that running "tractor fluid" instead of 90wt would be OK. I realize this is a subject that has been beaten to death but...

older l775 I want to flush out the systems. Specs call for 90 wt in the gearcase and chaincase and Only Dextron II ATF in the hydraulic reservoir. It has been sitting and I would like to run it with "cheaper" oil/fluid for a week/month or 2, then change fluid again. I am wondering if I can use...

I'm looking at a few "smaller" machines, bobcat 371, case 1816, an older mustang machine, bobcat farmboy, possibly one of the stand behind machines... I want to get the smallest machine that will be suitable for me, because I would like to use it later this year when my house is jacked up (and...

Looking to buy a smaller, older, used skid steer. ROUGH Criteria: What is important...Low gross weight of machine (Under 3000 lbs), stability, 600-1000 lb lift capacity, would be nice to have a diesel but not necessary. One option is a Case 1816, operational weight 2090lbs, 700lb lift capacity...

f2l411d used in bobcat 631 (years 77-80 for sure), I have manual and it just says "remove injectors", the corresponding diagram/picture does not help. Also used in bobcat 611, 610 (not sure what years)...possibly others and other equipment such as pumps and compactors. Thanks for the input, I...

click here for picture of injectors

Thanks for the input. I am familiar with injectors like the ones you describe (ie cummins 5.9L) that have a hold-down bracket and can be pulled with slidehammer or homemade tool. However, these ones (f2L 411D) do not have any type of hold down bracket, and don't seem to be threaded either. It's...

Can anyone describe how to remove injectors, or special tools required? Thank you!