Hello skidsteerers, I'm new to the forum. I just got a used and dead 743b, hoping to make it go for use around the yard. Spent the last weeks degreased, pressure wash 3 times just be able to see what im doing. A disclaimer: I know nothing about bobcat; just a guy who likes to do thing and learn as I go. anyway, I am looking for a picture of the wiring on the right side of the motor (fuel filter side.) I think the previous owner did some "custom wiring" and all the end wires are white but when I peeled out some protector sheets, I see different color after the wire nuts... Some wires are loose and I can't tell what go where. I bought a manual but the wiring scheme is no use . Specific questions: 1/ toward the end of the engine block, there is A loose wire there. where do that go ? 2/ on the hydraulic filter, there seem to 3 wires, what are they and where do they go? 3/ under the cab, right next to the wire harness, there are 3 connectors/plug (blue/orange , red/white stripe and orange) . do they go some where or they are some type of test connector. I am tracing electrical now because the bobcat drain my battery in 45-60min Ok... you guys can laugh at me: what's an office guy doing with a dead bobcat ? I know, I know... Have a good day, ALL