Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Weak steering
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Tazza" data-source="post: 3674" data-attributes="member: 82"><p>From memory, the rear section of the pump indeed does controll the left side. There should be a few plugs in the centre of both sections, the ones on the rear half are for the left, the ones on the front half are for the right side. I'm not sure what side of the pump has the replenishing valves, just remove both, the plugs should be above where the hoses join to the pump. When you fiddle with these plugs, make sure you replace the O rings as this section is under extreme pressure, up to 5,000 PSI. Don't mix the springs up either, make sure yo do one plug at a time.</p><p>Just what was wrong with the pump? your rotating group was still ok? The yoke should be round, just with a flat section for the shoes of the pistons to run on.</p><p>If you need any info on the pump just let me know.</p></blockquote><p></p>
[QUOTE="Tazza, post: 3674, member: 82"] From memory, the rear section of the pump indeed does controll the left side. There should be a few plugs in the centre of both sections, the ones on the rear half are for the left, the ones on the front half are for the right side. I'm not sure what side of the pump has the replenishing valves, just remove both, the plugs should be above where the hoses join to the pump. When you fiddle with these plugs, make sure you replace the O rings as this section is under extreme pressure, up to 5,000 PSI. Don't mix the springs up either, make sure yo do one plug at a time. Just what was wrong with the pump? your rotating group was still ok? The yoke should be round, just with a flat section for the shoes of the pistons to run on. If you need any info on the pump just let me know. [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Weak steering
Top