Reply to thread

Message: <blockquote data-quote="mrbb" data-source="post: 133574" data-attributes="member: 13825">sounds to me like  the wheels on it are again NOT OEM wheels, so, maybe previous owner's swapped them for tire wheels, they had access too, like the air craft ones you stated are on it IO DO NOT know your specific model on how many lugs  were on it stock, but I would think, odds are, if it has 10 on it now, that was what it came with, as I do NOT know of anyone that modified the  axle/hubs to go to different lug amounts BUT that being said, have you removed a wheel off the machine to see if MAYBE, someone added some wheel spacers that allowed for the 10 lug set up"older machines like this, many times have had owners that , well, used things they had, and made mods to do so, rather than buying OEM parts or, to serve a need they wanted?crazy mods are out there, you know, them REDNECK fixes, HAHA! if I was you, I'd maybe suggest again pulling a wheel off the machine and look for wheel spacers /8 to 10 lug conversion  and do some looking online at some pictures of like machines and see what amount of lug nuts you see there if there just wheel spacers modified to go to 10 lug set up, odds are all you need to do is, remove the spacer and buy some OEM tire wheels and you will be back to OEM set up,Maybe a member here that owns a like model can add more, but , that would be my suggestion, pull wheels off machine and look and go from there!</blockquote>