Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 2523" data-attributes="member: 82">What model bobcat do you have?It should be located on the left hand side when you stand at the front looking in over the bucket. Lift the rops and it should be rite there down on the left. If its a gresson brand spool it has a heap of O rings that should be replaced that are located in the load checks. Each load check has 3 O rings, 2 load checks per spool block. Then there are 3 or 4 O rings between each spool block that you will need to replace if you have any leaks between sections. But if there are no leaks just leave them alone. The easiest way to replace the load check O rings is to remove the spool but its not a nice job!.You could change them on the machine but it will be difficult. Let me know the model and that may help in giving you more information.</blockquote>