Reply to thread

Message: <blockquote data-quote="zakscott22" data-source="post: 111855" data-attributes="member: 18948"><p>I checked pressure to the charge pressure sensor, just used my adapters and connected line directly to pressure guage. I am showing no pressure out of the charge pressure line. I'm getting pressure to other lines out of pump and I can feel heat in the lines when I let it run. Just nothing on the charge pressure side. The diagrams i found are split so its difficult to follow the hydraulic schematics. Im leaning towards pulling the charge pressure relief but was seeing if you had other ideas before I do that.</p></blockquote><p></p>