Reply to thread

Message: <blockquote data-quote="Timjame" data-source="post: 105345" data-attributes="member: 16402"><p>Well I got the injectors out. What a pain. For anybody reading that may have a similar situation I had to drill them out. Drill the top through and bottom through then smack the seized portion of the injector down through hole at the top of the head. Anyway I installed new injectors with the copper washers and wouldn't you know it, they aren't sealing. Every compression stroke the pressure pushes right past the injectors with a big puff. They are sitting flush in there, I made sure it was clean prior to installing them. Any thoughts?????</p></blockquote><p></p>