Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Stuck injectors!!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Tazza" data-source="post: 104852" data-attributes="member: 82"><p>If you have access, make your own slide hammer.</p><p>Get some round steel stock for the hammer, drill a hole in the middle, get a rod, weld one end to the injector, slide the "hammer" on and weld a cap to the other end of the rod. I have a dodgy home made one and it works a treat. It breaks welds every so often, i just weld it up and go again.</p><p>Just make sure the stopper you weld on is substantial, you want all that force to be transferred to the rod then injector, if it's thin, it will bend, loosing some of the energy from each blow.</p><p>Worst case, as mentioned, the head may need to come off to press them out from the other side.....</p></blockquote><p></p>
[QUOTE="Tazza, post: 104852, member: 82"] If you have access, make your own slide hammer. Get some round steel stock for the hammer, drill a hole in the middle, get a rod, weld one end to the injector, slide the “hammer” on and weld a cap to the other end of the rod. I have a dodgy home made one and it works a treat. It breaks welds every so often, i just weld it up and go again. Just make sure the stopper you weld on is substantial, you want all that force to be transferred to the rod then injector, if it's thin, it will bend, loosing some of the energy from each blow. Worst case, as mentioned, the head may need to come off to press them out from the other side..... [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Stuck injectors!!
Top