Reply to thread

Message: <blockquote data-quote="oiu789" data-source="post: 128914" data-attributes="member: 15807"><p>Make sure all of the glow plug came out. Some blister on the side and scrapes off when you pull them or the tip brakes off on stays inside. If this gets between the piston and the cyl it can score the cyl and piston. I like too put some heavy oil in the cyl with the plugs out roll it over by hand 2 to 4 revolutions to make sure no  hyd lock put the plugs in and start and run at a high idle this should blow out the pieces.</p></blockquote><p></p>