Reply to thread

Message: <blockquote data-quote="crosent344" data-source="post: 115354" data-attributes="member: 20172"><p>New member here. Bought a 2016 S570 new for use around the property. Has mostly seen snow removal, but have done some heavy stump removal work for a few days last year. I've been hearing a noise in the bucket area, and have found that the lower left bucket pin will allow the bucket to move back and forth horizontally about 1/2 inch. I grease the machine religiously, but that pin only holds grease about an hour, then I hear it sliding back and forth-clanking noise. Once I grease it again, it's quiet for a while. Is that normal, or do I have wear in that pin? The machine only has 170 hours on it, but it never used to have that much back and forth play in the bucket. Would a new pin and bushing fix it? Is there any harm in leaving it as it is? Thanks for reading.</p></blockquote><p></p>