Reply to thread

Message: <blockquote data-quote="brdgbldr" data-source="post: 119509" data-attributes="member: 7474"><p>My first guess would be a short in the wire harness. When the machine warms up the wire expands and makes a good connection. You should try to make sure all of the connection points are tight first. This will not be an easy task. Look up the electrical exploded view for that machine by serial number on bobcatpartsonline.com and that should give you an idea of where the connections are. Since all of the lights come on I would start at the controller and work my way back.</p></blockquote><p></p>