Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
S185 sounds like its missing and loses power under load
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Contractor" data-source="post: 112465" data-attributes="member: 6215"><p>Hi all. We have a 2004 S185 V2203 with 4134 hours on it. I recently replaced the cylinder head due to a crack after a few overheating cycles in the field. The machine sat in our yard for 2 years until I brought it in to try to revive it. I replaced the head, water pump, and thermostat. It runs but when trying to use hydraulics, it seems to bog and the exhaust is black. If I back of the hydraulics the engine speeds back up and the smoke clears. I have changed all fluids, filters. Did a compression check this morning and all 4 came up right at 400. Went ahead and adjusted valves to .008 this morning as well. One thing that has me wondering is that when I did the head and pulled the injector lines, one of the delivery valves came out with the line. I know I should have used a backup wrench. lesson learned. In any case Im wondering if I possible got something out of line in that valve when I put it back in. It had a spring and washer if I recall. I guess it wouldn't hurt to take the injectors in and have them tested. Just wondering if you all might have any ideas. Thanks a bunch Cole</p></blockquote><p></p>
[QUOTE="Contractor, post: 112465, member: 6215"] Hi all. We have a 2004 S185 V2203 with 4134 hours on it. I recently replaced the cylinder head due to a crack after a few overheating cycles in the field. The machine sat in our yard for 2 years until I brought it in to try to revive it. I replaced the head, water pump, and thermostat. It runs but when trying to use hydraulics, it seems to bog and the exhaust is black. If I back of the hydraulics the engine speeds back up and the smoke clears. I have changed all fluids, filters. Did a compression check this morning and all 4 came up right at 400. Went ahead and adjusted valves to .008 this morning as well. One thing that has me wondering is that when I did the head and pulled the injector lines, one of the delivery valves came out with the line. I know I should have used a backup wrench. lesson learned. In any case Im wondering if I possible got something out of line in that valve when I put it back in. It had a spring and washer if I recall. I guess it wouldn't hurt to take the injectors in and have them tested. Just wondering if you all might have any ideas. Thanks a bunch Cole [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
S185 sounds like its missing and loses power under load
Top