Reply to thread

Message: <blockquote data-quote="rjprice" data-source="post: 101362" data-attributes="member: 7556"><p>Thanks I was able to solder a wire onto the fuel pull pin and the machine starts as soon as you hit the starter. I repaired the other three wires also. There were two identical broken green wires so I had to guess where they attached to. I got no beeps so I assume I guessed correctly. No codes no beeps. I still don't have headlights. The tail lights work and the dash lights up as it should but no headlights. I will continue to trace those wires to see if I can get them working. I did a charging system check just for giggles. I'm not sure the battery is fully charged but the alternator output reads 15.2v. Is this too high?????</p></blockquote><p></p>