Reply to thread

Message: <blockquote data-quote="Mike10" data-source="post: 107840" data-attributes="member: 5461"><p>I use a 12 v hyd pump. If your boom cylinders are made with a rectangular block welded to the bottom of the cylinder barrel, then there will be a plug on the outside of the barrel at the bottom you can hook to that port. Connected like that and you do not need to loosen the hose on the other side. You will need to remove the top hoses so the oil can escape. I have a hose I connect to one cylinder and also to the steel line and connected to a third hose so I can direct the out flow oil to a bucket.</p></blockquote><p></p>