Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
project 751 re-build
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="skidsteer.ca" data-source="post: 13456" data-attributes="member: 307"><p>Tazza</p><p> You could build you own out of a old lpg tank. Buy a hose and some ceramic nozzels, a few valves and air dryer. You will have a better blaster then the boughten ones.</p><p>But the blaster is the cheap part. Its the 25 cfm or larger compressor that costs. I have a 27 cfm at 175psi (truck mount 12.5 hp kohler) and that has just enough air imo. Since I got a 18 cfm running in the shop, I now twin the two together. If pressure drops much under 100 , you just wasting sand. Even twined about 130 is where it levels off to. With the 27 when the nozzle got worn oversized, I had trouble maintaining 100 psi.</p><p> Most of the small portable blaster over here seriously underate the compressor required.</p></blockquote><p></p>
[QUOTE="skidsteer.ca, post: 13456, member: 307"] Tazza You could build you own out of a old lpg tank. Buy a hose and some ceramic nozzels, a few valves and air dryer. You will have a better blaster then the boughten ones. But the blaster is the cheap part. Its the 25 cfm or larger compressor that costs. I have a 27 cfm at 175psi (truck mount 12.5 hp kohler) and that has just enough air imo. Since I got a 18 cfm running in the shop, I now twin the two together. If pressure drops much under 100 , you just wasting sand. Even twined about 130 is where it levels off to. With the 27 when the nozzle got worn oversized, I had trouble maintaining 100 psi. Most of the small portable blaster over here seriously underate the compressor required. [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
project 751 re-build
Top