Reply to thread

Message: <blockquote data-quote="riftware" data-source="post: 119205" data-attributes="member: 20379"><p>I have an older skid steer and the right hand stick was working until today and it still works fine in reverse. If I push hard against the stick it won't go to the Forward position very far  but the right hand wheels will turn slowly  while pushing forward the little movement the stick allows so I don't think I have a motor problem when I pull the plate under the seat the linkage looks okay but the bit that pivots on the top of the motor doesn't seem to want to pivot to the forward position anymore.  I'm I'm assuming that something is loose or not in the proper spot internally but how much do I have to tear apart to get to the linkage inside the motor ?  Do I have to pull them a whole motor?</p></blockquote><p></p>