Reply to thread

Message: <blockquote data-quote=".50ae" data-source="post: 142052" data-attributes="member: 27004"><p>Hey guys sorry I don't have a whole lot of time to work on this thing just an hour or two when I get it. I drove it out to an auger I have and I hooked up the aux hydraulics to it. They're definitely stuck on. Auger spins without aux being engaged. If I engage them, actuating the thumb switch will stop the auger until I let go of it then it'll start spinning again. One or both of the aux solenoids always have power when the machine is on. Guessing that's not normal. If I disconnect the aux power at the key switch it doesn't make a big difference with the operation of the hydraulics. I'll physically track the lines because the guy before me definitely had a couple switched. I think I got them right but I could be wrong. I will probably pull the hydraulic control valve out and rebuild it. It sounds to me like something is wrong/stuck inside of it.</p></blockquote><p></p>