Reply to thread

Message: <blockquote data-quote="fork8000" data-source="post: 100283" data-attributes="member: 15176"><p>Thanks, taza for putting my pictures up - farmshop, no, Mustang tech support told me they install a vinyl decal with the model + ser number on the left hand side, either on the side of operator cage or in the inner fender well. I've examined the entire machine very closely and can find no decal. I asked Mustang tech support if they "stamped" the serial number anywhere and they said "no". Its hard to believe that a manufacturer of dirt excavation equipment would only put machine data on a decal but I guess they did. There's a lubrication guide decal inside the back engine cover, but it is so faded I cant make out any of the fine print around the edges. One thing I've learned though, is, this skid IS NOT a model 345. Unless its some sort of last year crossover to a newer design. It very closely resembles a mod 940. I want to get a parts book so if I have any parts failures other than general items I will have a part number that might cross to some makers inventory (hyd pump/motors) I bought a mod 345 parts book off ebay for $30 some odd dollars and thats when I found out this is not a 345. Mustang tech support tried to help but I dont think they have any knowledge of the old machines...</p></blockquote><p></p>