Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 109528" data-attributes="member: 82">Well that sure makes sense, you will need a big machine for that. Those must be some large logs you cut, i have seen videos on youtube of people with saw mills, some are really impressive.I don't know the full range of machines out there, there was a 9 series in the bobcat range that would lift that sort of weight, but they are quite rare and parts are expensive. Not sure if they have built a modern version of it or not.I believe my S250 is rated for 2,500 lbs but can lift more. I don't know the numbers that the machine will tip at, that you can use to size what size machine will do the job you intend it to do.I know i picked up a 1,200kg welder with ease using my S250, it didn't feel light on it's feet either, so i feel it still have a fair bit more in it'a abilities. A machine that size may do what you want it to do.</blockquote>