Reply to thread

Message: <blockquote data-quote="bobbie-g" data-source="post: 1839" data-attributes="member: 26"><p>dch -- The seat switch on my 751 quit working at one point. I removed the seat and disassembled the switch. It appears to be a magnetically activated switch. A magnet moves up and down in a sensor assembly. When the magnet is in the right position, it is detected and an "operator present" or some such signal is sent to the control system. Turned out on mine the magnet was not travelling enough, so we adjusted it with a washer. If it gives any more trouble, I'll just insert the magnet in the sensor and glue it in place so the control system always thinks I'm in the seat. --- Bob</p></blockquote><p></p>