Reply to thread

Message: <blockquote data-quote="sandhills-elect" data-source="post: 22405" data-attributes="member: 1145"><p>I would be very careful what you do, i have one and they have hydraulic controls to the sticks to run everything. I think they are microdyraulics? Don't want to cause more damage than needed. I would skid it or find a forklift to lift it. They weigh about7-8000lbs. if you could jack it up and put plywood or metal under it and slinde that i would think it would move rather easily. (hook to plywood or metal and pull on that not machine) Jack trailer tung clear up to set back on ground or lift it with anther machine block trailer wheels and tough and pull of with other machine, then as you get to the ground if you had pipes as wide as machine or round post you could put them underneth to let it roll on that. Just a thought take if for what it is worth. the filter under cab only needs replace like every 500hrs and should not have much in 500 if it is taken care of.</p></blockquote><p></p>