Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
mt 52 blowing engine fuse
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="OldMachinist" data-source="post: 45029" data-attributes="member: 437"><p>I don't have a wiring diagram for your machine but in a typical Bobcat wiring the engine fuse supplies power to the ignition switch on a red/white wire which also goes to the glow plug switch if it has one.</p><p>I would pull the connector off the back of the ignition switch and then see if it blows the fuse when you put in a new fuse. If it does then you have a short in the wire from the fuse block to the switch. If it doesn't blow then remove the relays, reconnect the ignition switch. If it blows right away then I'd suspect the switch. Next install each relay one at a time until it blows and then trace that circuit to find the short.</p></blockquote><p></p>
[QUOTE="OldMachinist, post: 45029, member: 437"] I don't have a wiring diagram for your machine but in a typical Bobcat wiring the engine fuse supplies power to the ignition switch on a red/white wire which also goes to the glow plug switch if it has one. I would pull the connector off the back of the ignition switch and then see if it blows the fuse when you put in a new fuse. If it does then you have a short in the wire from the fuse block to the switch. If it doesn't blow then remove the relays, reconnect the ignition switch. If it blows right away then I'd suspect the switch. Next install each relay one at a time until it blows and then trace that circuit to find the short. [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
mt 52 blowing engine fuse
Top