Reply to thread

Message: <blockquote data-quote="Jeffscarstrucks" data-source="post: 18526" data-attributes="member: 1245"><p>Well I finally got the machine over to the house with my rigged-up pre-filter. I tried to put it to the test by digging a full scoop out of a pile of dirt while going into it hard enough to try to stall the tracks. It did fine and spun the tracks while I lifted the bucket enough to maintain forward motion and fill the bucket...I was happy. I figured that this is a real world test since I have not run one of these before to have an idea of what to compare it to. Of course this went on for an hour while my son and I had a little fun and also moved some lumber and supplies with the forks. I still have some work to do but it is nice to see some light at the end of the tunnel.I was going to post a pic or two but I can't seem to figure it out. Thanks for all of your help and info, JEFF P.S. I try to catch this forum, Millerwelds, and the ACMOC (Antique cat machine owners club) about every day.</p></blockquote><p></p>