Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Other Brand Skidsteer Forums
New Holland Skidsteer Forum
main return line in belly of 665
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Tractormech" data-source="post: 113183" data-attributes="member: 19296"><p>I assume the line has the 90 degree fitting crimped on it and there's a fitting in the cooler that's part of the cooler but there's a hex on it so you can back it up while tightening line up to it. Get an air chisel with a pointed bit and put it on the back edge of the nut on the hydraulic line and put the backup wrench on the cooler fitting. Hit the air hammer to drive the fitting counter clockwise. It'll break loose for you. That vibration will move the world. That line may be a pill to get out as a lot of them run through the cross member in the frame under the motor. Look close and see what you have. Good luck!</p></blockquote><p></p>
[QUOTE="Tractormech, post: 113183, member: 19296"] I assume the line has the 90 degree fitting crimped on it and there's a fitting in the cooler that's part of the cooler but there's a hex on it so you can back it up while tightening line up to it. Get an air chisel with a pointed bit and put it on the back edge of the nut on the hydraulic line and put the backup wrench on the cooler fitting. Hit the air hammer to drive the fitting counter clockwise. It'll break loose for you. That vibration will move the world. That line may be a pill to get out as a lot of them run through the cross member in the frame under the motor. Look close and see what you have. Good luck! [/QUOTE]
Verification
Post reply
Forums
Other Brand Skidsteer Forums
New Holland Skidsteer Forum
main return line in belly of 665
Top