Reply to thread

Message: <blockquote data-quote="mark18mwm" data-source="post: 88720" data-attributes="member: 9306"><p>I think it would sell. scrap yards especially could use something like this. I drove semi truck many years hauling lumber. Quite a few places I went the fork lifts had magnets hanging below the fork lift to pick things up before they got stuck in tires, they do work too, i'v seen it myself. they were permanent magnets that had to be manually cleaned off. In my opinion, something that could be used by forks might be the handiest. Then you are not limited to only equipment with a quick attach or permanent mount. On most job sites there is something with forks running around, to just slip it on, plug it in (electro mag I would assume) and go.</p></blockquote><p></p>