Reply to thread

Message: <blockquote data-quote="Kilroy2k1" data-source="post: 18858" data-attributes="member: 2002">I pulled the block apart and none of the seals appear damaged, but they are definately old and stiff so they may have been leaking. the load check poppets are a metal on metal seal so I'll have to devise some way of lapping them to be sure of a good seal there. I'm happy to see the spools are in good shape, some micro scratches but nothing to be concerned about. Once this block is done and everything is back together I can do a proper pressure test and see if the relief spring is as tired as the checkvalve spring was.Tom.</blockquote>