Reply to thread

Message: <blockquote data-quote="treyfox77" data-source="post: 106111" data-attributes="member: 11907"><p>Ok mike , I've made some headway tonight on the machine ! So I followed you recommendations and found that all the safety stuff is working properly. The two female connectors down at your feet that control the boom and arm are not getting 12 volts to them . I have a probe and supplied 12 volts and both valves are operating properly ( arm and boom will move if I give the power ) . So I have a electrical problem obviously. I checked all the fuses in the cab and outside in the engine compartment and all were good . Where do I start looking from here ? Also I followed exactly what you told me and the machine started moving towards and backwards with ease but the pumps are very noisy as it moves and turns . I actually rode it for a good 15-20 mins without it stopping. I feel like I am making headway !!! Thanks again for all the help !</p></blockquote><p></p>