Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Other Brand Skidsteer Forums
New Holland Skidsteer Forum
LS185b Hydraulic Brake Engaging Randomly
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Jelcoat" data-source="post: 123733" data-attributes="member: 22684"><p>Shanmar,</p><p>Let me start by saying a big thanks for the response. </p><p>As I said in my original post I replaced the seatbelt pressure switch and wiring harness what I left out is that I also replaced the seat cushion portion of the spring loaded seat because it had a big rip in it and I was tired of my wife asking me how I kept getting glue on the seat of my pants. The glue was from duct tape. </p><p>I currently don't have anyone to sit in the seat so I can wiggle the wires. I was thinking that it might be possible to temporarily install a 12 volt light bulb in the seat belt harness so I could monitor the consistency of the power while I operate the machine. I'm uncertain which color wire in the harness I should splice one of the bulb pigtail wires into. There's 2 red 1 white and 1 tan/yellow wire in the seatbelt harness plug on the firewall back side of the seat assembly. </p><p>I was thinking that the other wire should be grounded to the battery. If you have any suggestions I would appreciate it. </p><p>Thanks again,</p><p>Jim</p></blockquote><p></p>
[QUOTE="Jelcoat, post: 123733, member: 22684"] Shanmar, Let me start by saying a big thanks for the response. As I said in my original post I replaced the seatbelt pressure switch and wiring harness what I left out is that I also replaced the seat cushion portion of the spring loaded seat because it had a big rip in it and I was tired of my wife asking me how I kept getting glue on the seat of my pants. The glue was from duct tape. I currently don’t have anyone to sit in the seat so I can wiggle the wires. I was thinking that it might be possible to temporarily install a 12 volt light bulb in the seat belt harness so I could monitor the consistency of the power while I operate the machine. I’m uncertain which color wire in the harness I should splice one of the bulb pigtail wires into. There’s 2 red 1 white and 1 tan/yellow wire in the seatbelt harness plug on the firewall back side of the seat assembly. I was thinking that the other wire should be grounded to the battery. If you have any suggestions I would appreciate it. Thanks again, Jim [/QUOTE]
Verification
Post reply
Forums
Other Brand Skidsteer Forums
New Holland Skidsteer Forum
LS185b Hydraulic Brake Engaging Randomly
Top