Reply to thread

Message: <blockquote data-quote="schemasservice" data-source="post: 137412" data-attributes="member: 25507"><p>If I lift the lap bar and the BICS locks out, the drift stops. Same thing if I shut the machine off with the bucket in the air, it will sit there all day. I would say that rules out cylinder leakage? And if it's bypassing in the valve, that could also be causing the flow issue with my aux?  To throw another piece to this puzzle, my power bobtach is lazy (slow) also.  If I run the tilt back till it boggs the machine, the bobtach speeds up.  I did read the horror stories about the accessing the bobtach valve, and that if they fail, it's usually a sign that the pump is failing. But this has been going on for close to 1000hrs of machine time. I figured the pump would have completely failed by now if that was the case.  I didn't want to throw a pile of problems in my original post, but now it seems like they are all related and trying to tell me something..</p></blockquote><p></p>