Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Other Brand Skidsteer Forums
New Holland Skidsteer Forum
L785 Power Beyond Valve #219609
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Mike10" data-source="post: 106510" data-attributes="member: 5461"><p>The valve as you call it is a plug which screws into the main control valve. If the machine has the aux valve installed from the factory then the plug should be there already. If you are wanting to add another valve then you are asking the wrong question.................The power beyond plug screw into the control valve and then a line goes from the plug to the aux valve or next valve in line. If you have no line coming out of your control valve, then look where the control valve return line is attached. You should see a large head of a plug, that is where the power beyond screws into the valve. A machine shop should be able to make one for you after you take the valve to them...............When you remove the non power beyond plug it will be a short plug. If you look into the valve housing through the plug hole you will see a machine hole slightly below the plug opening. The power beyond plug is similar to the original plug only longer to enter this machine hole. The PBY plug outer diameter will be machined for an Pringle's and backup ringto seal against the machined hole. The PBY plug will also be hollow so oil can flow through it.</p></blockquote><p></p>
[QUOTE="Mike10, post: 106510, member: 5461"] The valve as you call it is a plug which screws into the main control valve. If the machine has the aux valve installed from the factory then the plug should be there already. If you are wanting to add another valve then you are asking the wrong question.................The power beyond plug screw into the control valve and then a line goes from the plug to the aux valve or next valve in line. If you have no line coming out of your control valve, then look where the control valve return line is attached. You should see a large head of a plug, that is where the power beyond screws into the valve. A machine shop should be able to make one for you after you take the valve to them...............When you remove the non power beyond plug it will be a short plug. If you look into the valve housing through the plug hole you will see a machine hole slightly below the plug opening. The power beyond plug is similar to the original plug only longer to enter this machine hole. The PBY plug outer diameter will be machined for an Pringle’s and backup ringto seal against the machined hole. The PBY plug will also be hollow so oil can flow through it. [/QUOTE]
Verification
Post reply
Forums
Other Brand Skidsteer Forums
New Holland Skidsteer Forum
L785 Power Beyond Valve #219609
Top